Cavern QuickEQ target comparison

This is a feature compatibility list of the decives natively supported by Cavern QuickEQ for export.

Icons

- Calculated and exported by QuickEQ, and the device supports it in high quality.
- Calculated by QuickEQ, but the device is not precise enough to handle it perfectly, thus values with decreased precision will be exported.
- The device supports this feature with required precision, but QuickEQ can't yet export it.
- This feature is not supported or the precision is not enough and QuickEQ doesn't export it.

Devices

Gains[1] Delays[1] 0-delay EQ 0-phase EQ Parametric EQ[2] Polarity EQ after bitstream
Equalizer APO (0.01) (0.01) (∞) (∞) (∞) [3]
MiniDSP 2x4 HD (0.1) (0.1) (1024) (1024) (10+10)
MiniDSP 2x4 Advanced (0.1) (0.1) (5+5)
Behringer NX series (0.2) (0.01) [4] (8)
Emotiva (0.5) (0.3[5]) [6] (11)
StormAudio (0.1) (0.1) [7] (12)

[1] - This feature is considered accurate if it's precise at least to a hundredth unit. Lower values are better.
[2] - This feature is considered accurate if gains and Qs are precise at least to a hundredth unit and Q is allowed in the range ]0.01;20[.
[3] - Can be solved by configuring the PC as a DSP with multiple sound cards after a processor which decodes the bitstream. This is a highly advanced and very costly solution.
[4] - Gains in 0.5 dB steps, Qs in 0.1 steps, maximum Q is 10.
[5] - In 10 cm steps, calculated at 343 m/s.
[6] - Gains in 0.5 dB steps, Qs in 0.2 steps, maximum Q is 10.
[7] - Gains in 0.01 dB steps, Qs in 0.25 steps, minimum Q is 0.25.