Cavern QuickEQ export guide
Welcome!
To experience the most powerful room correction in your theater, select your device from the tabs above for the relevant step-by-step export process. For PCs, Equalizer APO is the best possible EQ application interface, Cavern even supports one-click export for it. If you're having any issues, please check the Troubleshooting page.
Target comparison
This is a feature compatibility list of the decives natively supported by Cavern QuickEQ for export.
Icons
- Calculated and exported by QuickEQ, and the device supports it in high quality.
- Calculated by QuickEQ, but the device is not precise enough to handle it perfectly, thus values with decreased precision will be exported.
- The device supports this feature with the required precision, but QuickEQ can't yet export it.
- This feature is not supported or the precision is not enough and QuickEQ doesn't export it.
Devices
Gain (dB)[1] | Delay (ms)[1] | 0-delay EQ | 0-phase EQ | Parametric EQ[2] | Polarity | EQ after bitstream | |
---|---|---|---|---|---|---|---|
Cavern-based DSPs | |||||||
Equalizer APO (PC) | |||||||
CamillaDSP (PC) | |||||||
MiniDSP 2x4 HD | |||||||
MiniDSP 2x4 Advanced | |||||||
Behringer NX series | |||||||
Emotiva | |||||||
MultEQ-X | |||||||
StormAudio |
[1] - This feature is considered accurate if it's precise at least to a hundredth unit. Lower values are better.
[2] - This feature is considered accurate if gains and Qs are precise at least to a hundredth unit and Q is allowed in the range ]0.01;20[.
[3] - Requires many inputs routed to the system's output correctly. This is a highly advanced and very costly solution.
[4] - Gains in 0.5 dB steps, Qs in 0.1 steps, maximum Q is 10.
[5] - In 10 cm steps, calculated at 343 m/s.
[6] - Gains in 0.5 dB steps, Qs in 0.2 steps, maximum Q is 10.
[7] - Gains in 0.01 dB steps, Qs in 0.25 steps, minimum Q is 0.25.