Cavern QuickEQ export guide
Setup
Before making any measurements with QuickEQ, disable or remove all EQ sets you have in your WiiM device.
Measurement
Complete a measurement. If you need help with it, read the setup guide. After reaching the export screen, select WiiM from the dropdown and press Export results to device. This process is different in QuickEQ Complex. Select a location and name for the file that contains the filters you will have to enter on your WiiM device. If you choose a file that contains a previous measurement, it will be overwritten.
This is only an advertisement and keeps Cavern free.
Importing the QuickEQ configuration files
Open the WiiM app, and navigate to the settings of your device.
Select EQ under Sound.
Select a filter to modify. You will have to enter each one from the result file manually.
Find the channel's corresponding filter in the file. Filter 1 on this example will be found as:
Front Left
==========
Filter 1:
- Frequency: 32 Hz
- Gain: 3 dB
- Q factor: 1.7
Enter the filter's values, then save it.
After all filters have been entered for all channels, press Save.
Save the filter set with a new name using the New Custom EQ button, or choose an existing EQ to override.
Choosing New Custom EQ will prompt you to give a name to your EQ.
After that, click Create to save your EQ.
Your new EQ is now available for selection.
